Spring is almost here and it’s high time to decorate your shelves accordingly. But we’re bookworms, not gardeners, and we like wyrms, not worms, so we should put together something adorable and easy to take care of while we finish a book or ten.
You Will Need
- a mason jar (8oz)
- some sort of fill
- a flower/succulent sheet (can be found in the floral section of your favorite craft store)
- a dragon figurine
- fairy lights
- a solar mason jar lid
Step 1: Remove Cat From Table
Repeat step throughout project as necessary.
Pick a Style and Follow Along
Fill the mason jar up a little less than halfway. Don’t fill the jar more than halfway or there will be too much filler in the jar. Then tilt the jar so that the filler rides up the side.
The jar should be tilted about 45°. You don’t want to shake too much fillter away from the side of the jar or you’ll decrease the size of the wall.
Push the figure into the lower side of the filler.
Add the succulents/flowers in the wall of filler, keeping the jar tilted while you do. It’s best to dig the stem into the filler to the point that the top also rests in it.
The final step is to seal the jar. You may have to re-screw the lid on multiple times before the light sits correctly over the figurines.
Book Wyrm’s Reading Nook
If you’re not particularly crafty, this is the easiest option.
You will only need about an inch worth of fill for the dragon jar. You can do more if you wish, but definitely not less.
Place your succulents/flowers into the fill. Make sure to push them in so they hold they’re place.
Place your figure next to the succulents and push it into the fill. Place a dollhouse book in front of it to give it something to read.
Screw on the solar light lid! You won’t have to re-screw this one because there’s very little in the way to block the light. Good news for our little reading friend.
Little Book Wyrm’s Fairy Lit Nook
Remove the cat from the table. He’ll only get in the way.
The fairy lights have to go in first. This way they can be worked in with the succulents/flowers and figures instead of later knocking them over. Only add a few rings of lights as the rest will be above the filler.
Add about an inch of filler over the lights.
Curl the fairy lights around the succulent/flower stem before pushing it into the filler. You can also wrap the light through the leaves/petals to add more light around the objects.
Gently, work your figure through the wires from the lights and place it into the filler. To add the book, you may need to use tweezers to place and push it into the filler.
Guide the unprotected wire over the lip of the jar and pinch it to the rim. Then screw the lid on tight.
Glue the protected part of the wire around the lip, keeping it beneath the lid. Then guide the wire down the back of your jar and glue it in place.
Now the battery pack fits wherever you need to place it.
Make your own and tag us on Facebook, Twitter, or Instagram at @BookedOwlNight!
Check out this post from @bookedallnightowlsTweet